LEME Device-SIP White
The device's surface is covered with delicate and smooth rubber paint that feels nice to the touch. LEME heating device is both lightweight and powerful. It's easy to clean this electronic cigarette. The number of puffs and battery life were calculated using the METEX test data. The charging port is Type-C, which is the current industry standard. Why don't you go with this LEME heating device, which is always worried about your safety while in use? The LEME device and the herbal stick are an excellent match!
1. Check battery：
·The power is less than 20%, and the yellow LED light blinks 3 times.
·The power is between 20% and 50%, the yellow LED light will be on for 2.5 seconds and then go off.
·The battery level is between 50% and 100%, and the white LED light will be on for 2.5 seconds and then go off.
2. Start heating:
·Press the button 3 times, the device vibrates once, the white LED light blinks, the preheating process is turned on;
·when the heating reaches the ideal temperature, the body vibrates twice, and the white LED lights on continuously, which means you can start to smoke.
3. Stop heating:
·When the maximum working time reaches 5 minutes or the number of suction ports reaches 14, the device vibrates once, the white LED light is off, and the heating stops.
·Press and hold the button for 2 seconds to shut down.
4. Low battery reminder：
·Yellow LED blinks 10 times.
5. Abnormal temperature：
·The red LED blinks 10 times and the device vibrates 5 times.
·The battery level is between 0% and 50%. During the charging process, the yellow LED light blinks while breathing.
·When charging enters 50%～100%, the white LED light blinks during the charging process.
·When the charging is completed, the white LED light goes off. When the charging cable is pulled out, the white LED light turns on for 2.5 seconds and then goes off.